Care & Cleaning

Maintaining quartz surfaces is easy. Simply wash with a soft cotton cloth and warm water, use a mild soap if desired.

  • Do not expose, in use or otherwise, quartz to abrasive or strong alkaline, acid, free radicals, oxidizers or similar (whether high, neutral or low pH) cleaners. Various chemicals are corrosive and/or erosive in their ability to attack any structure including quartz. Be very aware of these potential damages to your surface.
  • Quartz is not heat proof, chemical proof or fracture proof. Be aware of damaging exposure to these potential damaging acts upon your quartz.
  • Do not use or expose quartz to such products including, but not limited to bleach, oven cleaners, Comet®, Soft Scrub®, SOS®, products with pumice, batteries, paint removers, furniture strippers, tarnish or silver cleaners, or the like. 
  • Do not use abrasive or harsh scrub pads. 
  • Do not apply any sealers, penetrants or topical treatments to Quartz under any circumstances. Such products will wear off and cause the gloss to appear dull or inconsistent. 
  • Quartz is a natural material. Variation in the quartz color, pattern, size, shape and shade are inherent and unique characteristics to be expected with this product. This does not affect the product performance in any manner.
  • Color blotches are intended and designed into many designs to enhance the natural beauty. Samples are small select cuts from a slab; they do not exhibit all the characteristics of a design and therefore are not fully representative of what will be installed. Product will not be replaced due to these variations.
  • Quartz is durable and more resistant to surface damage than other stone. However, all stone can be damaged by force and no stone is chip-proof. Objects hitting edges particularly at sinks or dishwashers may cause chips. Though a minor knife slip will dull the knife and not harm quartz, no stone surface is scratch-proof. Surface markings are more visible on monotone designs than multi-colored surfaces.
  • Quartz is not a seamless product, seams are visible. Where there are seams the product pattern and shade can change.
  • Quartz surfaces can be damaged by sudden and/or rapid change of temperature especially near the edges, as well as direct and/or sustained heating of the top. Quartz may not withstand the direct transfer of heat from pots and pans and other cooking units such as electric frying pans and griddles, and some crockpots or roaster ovens and heat lamps. Therefore, the use of a hot pad or trivet is always recommended to prevent heating the Product.
  • Quartz is not a structural support product. 2 cm and 3 cm quartz thicknesses are for countertops and must be supported. 1 cm thicknesses are for surface finishes such as walls, tub and shower surrounds and fireplaces; horizontal applications such as a tub deck must be completely supported as well.
  • Semi-polished finishes (1 cm) will not shine and will soil and appear to stain from soiling.
  • Quartz installation is optimized when walls and cabinets are properly prepared for installation. This includes but is not limited to structurally sound, straight, level and square walls and cabinets, lack of which may cause poor installation and poor seam fit, or inconsistent countertop overhang and placement.